• Products
  • Content
    The product images shown are Illustrative only and may not be an exact representation of the product.

    PosiClean™ Belts

    Gates TPU PosiClean™ Belts are an easy to clean, quieter running, positive-drive replacement for straight-running plastic modular belts and unsupported monolithic belting in direct contact with food. They can also be used as a design alternative for flat fabric belting in the food processing industry. PosiClean™ Belts have sealed aramid tensile members to limit belt stretch and a synchronous timing belt construction extending across the full belt width for better torque distribution. Various high performance surface textures are available to meet specific product release, placement, and control needs. This positive-drive and easy-to-clean belt is FDA-approved, EU-compliant, and USDA-accepted.

    • Smooth urethane surface allows superior cleaning at the microbiological level facilitating an effective clean-in-place process.
    • Positive-drive design handles higher loads at lower belt tension versus flat conveyor belt.
    • Sealed edges and embedded tension members prevent ingress of microbes.
    • Designed for ease of use in wash down environments – easier to clean and weighs significantly less than plastic modular belting.
    • Ideal for high load applications – aramid tensile cords limit belt stretch and full width drive teeth evenly distribute torque.
    • Available in perforated "de-watering" configuration to facilitate rapid water drainage.

      E-mail : [email protected]
    Téléphone : 49 (0) 6157/9727-0

    Use our calculator tool to estimate water savings with PosiClean Food Belts

    Application Advantages you can count on.

    PosiClean™ Belts provide an average of 40-50% savings in water usage, labor, and waste water disposal versus plastic modular belting by offering a clean in place solution. Use our Water Savings Calculator to estimate potential savings and compare total cost of ownership to your existing solution. Aramid tension members eliminate belt stretch, a common cause of belt failure in long length applications. PosiClean™ Belts also have no hinges or pins to break and contaminate product.


    Meets material requirements for wet food contact


    For meat, poultry and dairy processingequipment


    Meets material requirements for wet food contact

    Features and Benefits

    Our PosiClean™ Belts are a line of easy-to-clean urethane food processing belts designed with sealed tension members and drive teeth across the full belt width for superior strength, quieter operation, and easier cleaning.

    • Positive-drive design handles higher loads at lower belt tension versus flat conveyor belt.
    • Easy installation – can be welded for endless construction or spliced with mechanical fasteners, including Gates PosiLace™.
    • Offered with aramid tensile members which provide high strength and limit belt stretch.
    • Tooth design enables direct replacement of most 1" and 2" pitch plastic modular belt.
    • Available in cold temperature and metal detectable resins as well as high strength cord construction.
    • Range of customization options available, including applied cleats and special surface textures.
    • Smooth surface allows cleaning to microbiological level and facilitates clean-in-place process that saves water and labor time.
    • Maintains dimensional stability under high temperatures and loads.
    • Sealed edges and tension members prevent ingress of microbes.
    • Available in 1" (PC10) and 2" (PC20) pitches and widths up to 48".
    • Suitable for cold temperature, metal detectable, and high strength applications.
    Find additional product information, expert tips, case studies, manuals, and the latest industry insights when you visit the Knowledge Centre.