Menu
Products
  • Products
  • Content

    Products By

    The product images shown are Illustrative only and may not be an exact representation of the product.

    CM2T Wire Braid Hose - EN 857 2SC - Dual Line

    Recommended for high abrasive high-pressure hydraulic oil lines that are joined together for easier plumbing and routing. High pressure and return lines such as boom arm and forklift applications. IMPORTANT: Gates recommends minimum split length of 250 mm depending on the application. Do not expose hose reinforcement when splitting hoses. Recommended Couplings: GlobalSpiral™ Couplings, MegaCrimp® Couplings.

    • CM2T - Twin hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids.
    • Superior flex impulse performance: Tested to 1,000,000 impulse cycles at 50% of EN 856 R12 and SAE 100R12 bend radii (except -32).

    Features and Benefits

    • With the Gates special XtraTuff® cover which offers 25 times the abrasion resistance of the standard CM2T cover as per ISO 6945.
    • Standards: Meets or exceeds the requirements of ISO 11237 2SC R16S. EN 857 2SC. SAE 100R16. ISO/DIS 1436.
    • CM2TDL-XTF hose has smaller exterior dimensions and significantly tighter bend radius.
    • No need to use clamps as the two lines are vulcanized together to form one single unit.
    • Meets Flame Resistance Acceptance Designation MSHA 2G.
    • 70% of EN 857 2SC bend radius at rated working pressure.
    • Superior flex impulse performance.
    • Validated with MegaCrimp®.
    • Temperature Range:
        • -40°C to +100°C
        • -40°F to +212°F
    • Size: 3/8" to 1/2".

    Sort & Filter

    Close
    Close