The product images shown are Illustrative only and may not be an exact representation of the product.

Powergrip® HTD® Twin Power® Timing Belts

Gates® PowerGrip® HTD® Twin Power® synchronous belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity. They have nylon facing on both tooth sides to provide equal high load carrying capabilities between the sides.

  • Fiberglass tensile cords provide high strength durability, excellent flex life, and high resistance to elongation.
  • Neoprene body resists against wear from grime, grease, oil, and moisture.
  • Temperature Range: -22°F to 212°F (-30°C to 100°C).

All Parts

1-10 of 98 Items
Part # Product # Description Number of Teeth Section Pitch (mm) Profile Width (in) Width (mm) Material
92520584 TP1270-5M-25 TWINPWR 254 5M 1270 HTD 25 CR
92520554 TP1420-5M-15 TWINPWR 284 5M 1420 HTD 15 CR
92520585 TP1420-5M-25 TWINPWR 284 5M 1420 HTD 25 CR
92970778 TP14205M09 ABAR 284 5M 1420 9 CR
92970794 TP1690-5M-15 338 5M 1690 15 CR
92520525 TP1690-5M-09 TWINPWR 338 5M 1690 HTD 9 CR
92970214 TP1945-5M-15 389 5M 1945 15 CR
92970277 TP19455M150 389 5M 1945 6 CR
92970621 TP2000 5M 150 400 5M 2000 6 CR
92520528 TP2000-5M-09 TWINPWR 400 5M 2000 HTD 9 CR
1-10 of 98 Items


PowerGrip® HTD® Twin Power® Timing Belts improve operations for a range of applications, including data storage equipment, hand power tools, postage handling, food processors, office machines, centrifuges, money handling, medical diagnostic, sewing machines, ticket dispensers, robotics, vending machines, vacuum cleaners, and so much more.

Features and Benefits

  • Runs quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor.
  • Nylon tooth facing provides a durable wear surface to improve service life.
  • 30% increase in horsepower ratings compared to traditional timing belts.
  • Transmits up to 100% of its maximum rated load from either side of the belt.
  • Wear resistant nylon fabric on both tooth sides.
  • High loading capacity.
  • Non-slip positive drive.
  • Running at low noise.
  • Perfect fit on HTD® profile pulleys.
  • Available in 5M pitch.


Get more out of your belts with Twin Power, which puts teeth on both sides of the belt. This ergonomic design increases both working capacity and belt lifetime, and gives equal working capacity to both driving surfaces.