Products By
Product Innovations from Gates
You can count on Gates to supply innovative new products that push the boundaries of materials science. We engineer our products to continually exceed expectations and outperform industry standards. We are constantly expanding our product catalog and services to support every facet of our customer's operations.
Long-length PowerGrip® GT®2 belting is a cost effective, low maintenance drive alternative. The PowerGrip® GT®2 belt tooth is designed for use with a specific sprocket groove profile. The sprocket groove-belt tooth combination increases capacity, while improving registration.
| Part # | LL3MR06 / LL3MR06 |
|---|---|
| Product # | 93960002 |
| Description | LL3MR06 |
| UPC | 072053625561 |
| Pitch Length (in) | 60.47 |
| Pitch Length (mm) | 1536 |
| Pitch (in) | 0.118 |
| Pitch (mm) | 3 |
| Section | 20M |
| Width (in) | 0.236 |
| Width (mm) | 6 |
| Markets/Applications | Well suited for linear movement, positioning and conveying applications. |
|---|
| Color | Black |
|---|---|
| Material | CR |
| Notes | Continuous lengths, if needed, must be specified when ordering, and must be ordered in increments of the minimum order quantity (unless ordering the maximum continuous lengths). Minimum order lengths for belting is 50 feet, ordered in 50 foot increments thereafter. Minimum order quantities may vary for non-standard widths. Continuous lengths may require lead times. Check with Customer Service. |
|---|---|
| Recommended For | PowerGrip® GT®2 Sprockets |
| Belt Notes | Continuous lengths, if needed, must be specified when ordering, and must be ordered in increments of the minimum order quantity (unless ordering the maximum continuous lengths). Minimum order lengths for belting is 50 feet, ordered in 50 foot increments thereafter. Minimum order quantities may vary for non-standard widths. Continuous lengths may require lead times. Check with Customer Service. |
| Customer Pack | 600 |
|---|---|
| Weight (lbs.) | 0.02 |
