Products
  • Products
  • Content
    The product images shown are Illustrative only and may not be an exact representation of the product.
    View All Chem Master™ Plus XLPE

    1-1/4X200 CHEM MASTER EPDM 150SD

    Product # 46960203

    RECOMMENDED FOR: Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master™ Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross–linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open–end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries.

    • CAUTION: For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744–5070. Chem Master™ Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however, the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744–5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning.
    • For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744–5070.
    • Additional color covers available on special order.
    • Reference Gates Chemical Resistance Table for proper hose selection.
    • Chem Master™ Plus XLPE CR contains a monofilament helix for suction and crush resistant capability, as well as for routing hoses through tight bends.

    • Product Details
      Part # 11/4X200COLT / 1-1/4X200 CHEM MASTER EPDM 150SD
      Product # 46960203
      Description 1-1/4X200 CHEM MASTER EPDM 150SD
      UPC 770075340850
      Vacuum (In. Hg) 30
      Continuous Operating Temperature Range -40°F to +250°F
      Minimum Bend Radius (in) 4
      Minimum Bend Radius (mm) 102
      Hose Inside Diameter (in). 1.25
      Hose Inside Diameter (mm) 31.8
      Hose Outside Diameter (in) 1.79
      Hose Outside Diameter (mm) 45.5
      Inside Diameter (in) 1.25
      Inside Diameter (mm) 31.8
      Temperature Range -40°F to +250°F (-40°C to +121°C)
      Working Pressure (psi) 150
      Outside Diameter (in) 1.79
      Outside Diameter (mm) 31.8

    Features and Benefits

    • Tube: Type K (Gatron™ Modified Cross-linked Polyethylene).
    • Reinforcement: Synthetic, high tensile textile cord with steel wire helix.
    • Cover: Type P (EPDM). Black or green corrugated with orange stripe.
    • Design factor : 4:1.