RECOMMENDED FOR: Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744–5070 for inspection and assembly testing information. Warning: Do not convey LP Gas over +140°F (60°C).
| Part # | 4FM7002 / 4LP350X X50FT |
|---|---|
| Product # | 32201300 |
| Description: | 4LP350XX50FT |
| UPC | 72053498363 |
| Includes Switch Port | false |
| Vacuum (In. Hg) | 30 |
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in) | 0.25 |
| Hose Inside Diameter (mm) | 6.4 |
| Hose Outside Diameter (in) | 0.58 |
| Hose Outside Diameter (mm) | 14.7 |
| Max. Working Pressure | 350 |
| Max. Working Pressure (Bar) | 24.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 15.2 |
| Use | Industrial Hose |
|---|
| Color | Black |
|---|
| Notes | Application Note: No LP350 hose assemblies 60" or longer allowed per UL requirement. |
|---|---|
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures up to 350 psi rated working pressure. Can be used for natural gas under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). Not recommended for residential or office buildings. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. Meets UL Standard #21, CAN/CGA-8.1-M86, NFPA 58, Section 8-3, 5. |
| Customer Pack | 1 |
|---|---|
| Weight (lbs.) | 6.43 |