C5D high-temp hose is recommended for use with petroleum-based or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline, turbocharger oil supplies, tilt cab cylinder and air brakes. Not approved for biodiesel above B5.
| Part # | 85680 / 4C5D X50FT |
|---|---|
| Product # | 36580001 |
| Description | 85680 4C5D X50FT |
| UPC | 072053341713 |
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 1 |
| Minimum Bend Radius (mm) | 25.4 |
| Min. Burst Pressure (psi) | 1500 |
| Hose Inside Diameter (in). | 0.1875 |
| Hose Inside Diameter (mm) | 4.8 |
| Hose Outside Diameter (in) | 0.52 |
| Hose Outside Diameter (mm) | 13.2 |
| Inside Diameter (in) | 0.1875 |
| Inside Diameter (mm) | 4.8 |
| Temperature Range | -40°F to +300°F (-40°C to +149°C) |
| Working Pressure (psi) | 1500 |
| Length (m) | 15 |
| Outside Diameter (in) | 0.52 |
| Outside Diameter (mm) | 13.2 |
| Coupling Recommendation | C5 Field Attachable Couplings [G34 Series] |
|---|---|
| Use | Fleet |
| Color | Green |
|---|---|
| Cover | Polyester Braid Impregnated with Synthetic Rubber. Green |
| Reinforcement | 2-braid, textile, wire |
| Tube | CPE - Type J; Black; Heat, Oil Resistant |
| Construction: Cover | Polyester Braid Impregnated w/ Synthetic Rubber |
| Construction: Reinforcement | 2-braid, textile, wire |
| Construction: Tube | CPE - Type J |
| Standard Industry Specification | SAE J1402 All |
|---|---|
| Meets These Agency Specifications | DOT - Department of Transportation; USA, FMVSS - Federal Motor Vehicle Safety Std. USA, SAE - Society of Automotive Engineers |
| Notes | J1402 Type AII. DOT FMVSS 106-74 Type AII. Air to +250°F Max. Phosphate Ester Fluids to +212°F. |
|---|---|
| Recommended For | Petroleum-based or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (-4 to -12) meets or exceeds DOT FMVSS 106-74 Type All, SAE J1402 Type All. Not approved for bio-diesel above B5. |
| Customer Pack | 1 |
|---|---|
| Weight (lbs.) | 7.19 |
| Packaging | T |