Products
  • Products
  • Content
    The product images shown are Illustrative only and may not be an exact representation of the product.

    PowerGrip® Twin Power® Timing Belts

    Gates® PowerGrip® Twin Power® Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power® belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power® synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip® Twin Power® belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.

    • Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
    • Neoprene body provides protection against grime, grease, oil, and moisture.
    • Belt capacity is equal to standard single-sided PowerGrip timing belts.

    All Parts

    Part # Product # Description Number of Ribs Number of Teeth Effective Length (in) Effective Length (mm) Pitch (in) Pitch (mm) Outside Circumference (in) Outside Circumference (mm) Type Width (in) Width (mm) Top Width(in) Top Width(mm) Section Material Roll Length (m)

    WE'RE TAKING DOWN DOWNTIME.

    Gates® PowerGrip Twin Power Belts run quieter than roller chain drives and eliminate the need for lubrication and re-tensioning to reduce maintenance, downtime and labor in your operations.

    Features and Benefits

    • Gates Twin Power belts have nylon facing on both tooth surfaces to provide equal load carrying capabilities on either side of belt.
    • Wear resistant nylon fabric on both tooth sides to provide equal load carrying capabilities on either side of belt.
    • Belt capacity is equal to standard single-sided PowerGrip Timing belts.
    • Temperature range: -30°C to +100°C (-22°F to +212°F).
    • Precision formed elastomeric teeth and body.
    • Free of lubrication and maintenance.
    • High efficiency, non-slip positive drive.
    • High tooth jump resistance.
    • Available in XL, L, H pitch.

    GIVE YOUR APPLICATIONS 100% ON BOTH SIDES, WITHOUT COMPROMISE.

    Twin Power® can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.