Products
  • Products
  • Content
    The product images shown are Illustrative only and may not be an exact representation of the product.

    PosiClean™ Belts

    Gates PosiClean™ Belts are an easy to clean, quieter running, positive-drive replacement for plastic modular belt, flat fabric belting, and unsupported monolithic belting in the food processing industry. PosiClean™ Belts have sealed aramid tensile members to limit belt stretch and a synchronous timing belt construction extending across the full belt width for better torque distribution. Various high performance surface textures are available to meet specific product release, placement, and control needs.

    • Smooth urethane surface allows superior cleaning at the microbiological level facilitating an effective clean-in-place process.
    • Sealed edges and tensile members prevent ingress of microbes.
    • Designed for ease of use in wash down environments – easier to clean and weighs significantly less than plastic modular belting.
    • Ideal for high load applications – aramid tensile cords limit belt stretch and full width drive teeth evenly distribute torque.
    • Available in perforated "de-watering" configuration to facilitate rapid water drainage.

    For more information, please reach out to us via email at
     contact@gates.com or by phone at +1 (603) 890-1515.

    Application Advantages you can count on.

    PosiClean™ Belts provide an average of 40-50% savings in water usage, labor, and waste water disposal versus plastic modular belting by offering a clean in place solution. Use our Water Savings Calculator to estimate potential savings and compare total cost of ownership to your existing solution. Aramid tension members eliminate belt stretch, a common cause of belt failure in long length applications. PosiClean™ Belts also have no hinges or pins to break and contaminate product.

    FDA APPROVED

    Meets material requirements for wet food contact

    USDA ACCEPTED

    For meat, poultry and dairy processingequipment

    EU COMPLIANT

    Meets material requirements for wet food contact

    Features and Benefits

    Our PosiClean™ Belts are a line of easy-to-clean urethane food processing belts designed with sealed tension members and drive teeth across the full belt width for superior strength, quieter operation, and easier cleaning.

    • Positive-drive design handles higher loads at lower belt tension versus flat conveyor belt.
    • Easy installation – can be welded for endless construction or spliced with mechanical fasteners, including Gates PosiLace™.
    • Offered with aramid tensile members which provide high strength and limit belt stretch.
    • Enables direct replacement of most 1” and 2” pitch plastic modular belt.
    • Available in cold temperature and metal detectable resins as well as high strength cord construction.
    • Customization options available, including cleats and surface textures.
    • Smooth surface allows cleaning to microbiological level and clean-in-place process.
    • Maintains dimensional stability under high temperatures and loads.
    • Sealed edges and tension members prevent ingress of microbes.
    • Available in 1” (PC10) and 2” (PC20) pitches and widths up to 48”.