Fuel Line Hose

Fuel Line Hose

Before you start your engines, equip them with Gates fuel hoses. We’ve engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power.

14 Items
Fuel Line Hose - PVC/EEC - Bulk

Fuel Line Hose - PVC/EEC - Bulk

Read More

Multi-purpose hose for use on fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol and ethers (up to the legal limits allowed by the EPA).

  • Meets SAE 30R6 and 30R7.
  • NBR-PVC cover.
  • Nitrile tube.
  • Oil-resistant cover resists the effects of high heat and ozone found in engine compartments.
  • Spiral reinforced construction.
Hide all 9 Products View all 9 Products
Fuel Line Hose - PVC/EEC

Fuel Line Hose - PVC/EEC

Read More

Multi-purpose hose for use on fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol and ethers (up to the legal limits allowed by the EPA).

  • Meets SAE 30R6 and 30R7.
  • NBR-PVC cover.
  • Nitrile tube.
  • Oil-resistant cover resists the effects of high heat and ozone found in engine compartments.
  • Spiral reinforced construction.
Hide all 9 Products View all 9 Products
Fuel Line Hose - Submersible

Fuel Line Hose - Submersible

Read More

Ordinary fuel line hose is designed to handle fuel on the inside only. The Gates Submersible Fuel Line Hose exceeds the SAE 30R10 rating and is capable of handling gasoline, alcohol-extended gasoline or diesel fuel in fully immersed, mobile, stationary and marine applications and E85 fuel.

  • Aramid Fiber reinforcement - the same fiber used in bulletproof vests and is pound-for-pound stronger than steel.
  • Engineered for constant contact with gasoline (and other liquid petroleum distillates) on the inside and the outside.
  • Excellent for use on fuel pumps in the gas tank.
  • Fluoroelastomer (FKM) tubed cover resists gas permeation and retards aging.
  • Meets the SAE 30R10 specification for submersible fuel line hose applications.
Hide all 6 Products View all 6 Products
Fuel Line Hose - Submersible - Bulk (10 Ft. Lengths, Order by Feet Not Each)

Fuel Line Hose - Submersible - Bulk (10 Ft. Lengths, Order by Feet Not Each)

Read More

Ordinary fuel line hose is designed to handle fuel on the inside only. The Gates Submersible Fuel Line Hose exceeds the SAE 30R10 rating and is capable of handling gasoline, alcohol-extended gasoline or diesel fuel in fully immersed, mobile, stationary and marine applications and E85 fuel.

  • Aramid Fiber reinforcement - the same fiber used in bulletproof vests and is pound-for-pound stronger than steel.
  • Engineered for constant contact with gasoline (and other liquid petroleum distillates) on the inside and the outside.
  • Excellent for use on fuel pumps in the gas tank.
  • Fluoroelastomer (FKM) tubed cover resists gas permeation and retards aging.
  • Meets the SAE 30R10 specification for submersible fuel line hose applications.
Hide all 3 Products View all 3 Products
Fuel Line Hose - PVC/EEC Clamshell Pkg

Fuel Line Hose - PVC/EEC Clamshell Pkg

Read More

Convenient, popular two foot lengths of return fuel line, PCV and EEC hose in self-service, reusable, recyclable package. Can be stacked on shelf or hung on a pegboard display.

  • Easy-to-follow instructions in each package.
  • Handy hose diameter indicator helps customer select the correct size.
Hide all 3 Products View all 3 Products
Barricade® Carburetion Hose - Clamshell Pkg

Barricade® Carburetion Hose - Clamshell Pkg

Read More

Low-permeation, premium hose for use on carbureted engines, PCV and EEC systems, and for fuel return hose on fuel injection systems. Not for use on the pressure-side of fuel injection systems or 2-stroke engines. Approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, methanol, ethanol, and gasohol fuels. Patented five-layer Greenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

  • Meets SAE J30R14T1, EPA 40 CFR 1051.110, and CARB small engine off-road requirements for low permeation (except for kink resistance).
  • Oil, heat, ozone and abrasion-resistant cover.
  • Recommended for carbureted engines in cars, light trucks, off-road vehicles and small engines.
  • Textile spiral layer (two spiral).
  • Thermoplastic barrier layer.
Hide all 5 Products View all 5 Products
Barricade® Carburetion Hose

Barricade® Carburetion Hose

Read More

Low-permeation, premium hose for use on carbureted engines, PCV and EEC systems, and for fuel return hose on fuel injection systems. Not for use on the pressure-side of fuel injection systems or 2-stroke engines. Approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, methanol, ethanol, and gasohol fuels. Patented five-layer Greenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

  • Meets SAE J30R14T1, EPA 40 CFR 1051.110, and CARB small engine off-road requirements for low permeation (except for kink resistance).
  • Oil, heat, ozone and abrasion-resistant cover.
  • Recommended for carbureted engines in cars, light trucks, off-road vehicles and small engines.
  • Textile spiral layer (two spiral).
  • Thermoplastic barrier layer.
Hide all 5 Products View all 5 Products
Barricade® Carburetion Hose - Bulk

Barricade® Carburetion Hose - Bulk

Read More

Low-permeation, premium hose for use on carbureted engines, PCV and EEC systems, and for fuel return hose on fuel injection systems. Not for use on the pressure-side of fuel injection systems or 2-stroke engines. Approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, methanol, ethanol, and gasohol fuels. Patented five-layer Greenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

  • Meets SAE J30R14T1, EPA 40 CFR 1051.110, and CARB small engine off-road requirements for low permeation (except for kink resistance).
  • Oil, heat, ozone and abrasion-resistant cover.
  • Recommended for carbureted engines in cars, light trucks, off-road vehicles and small engines.
  • Textile spiral layer (two spiral).
  • Thermoplastic barrier layer.
Hide all 5 Products View all 5 Products
Barricade® Fuel Injection Hose - Clamshell Pkg

Barricade® Fuel Injection Hose - Clamshell Pkg

Read More

Low-permeation, premium hose for use on all fuel systems, including fuel injection (MPI). Approved for use with gasoline, diesel, bio-diesel including soybean methyl ester (SME), rapeseed methyl ester (RME), palm methyl ester (PME) per ASTM D6751, E-85, methanol, ethanol, ethanol extended gasoline, gasohol fuels and 100% alcohol. Patented five-layer Greenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

  • Aramid reinforcement spiral braid for superior burst strength.
  • Exceeds SAE J30R14T2 (except for kink resistance) as well as low-permeation requirements for CARB.
  • Oil, heat, ozone and abrasion-resistant cover.
  • Recommended for any fuel injection applications for superior service life.
  • Thermoplastic barrier layer.
Hide all 3 Products View all 3 Products
Barricade® Fuel Injection Hose

Barricade® Fuel Injection Hose

Read More

Low-permeation, premium hose for use on all fuel systems, including fuel injection (MPI). Approved for use with gasoline, diesel, bio-diesel including soybean methyl ester (SME), rapeseed methyl ester (RME), palm methyl ester (PME) per ASTM D6751, E-85, methanol, ethanol, ethanol extended gasoline, gasohol fuels and 100% alcohol. Patented five-layer Greenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

  • Aramid reinforcement spiral braid for superior burst strength.
  • Exceeds SAE J30R14T2 (except for kink resistance) as well as low-permeation requirements for CARB.
  • Oil, heat, ozone and abrasion-resistant cover.
  • Recommended for any fuel injection applications for superior service life.
  • Thermoplastic barrier layer.
Hide all 7 Products View all 7 Products
Barricade® Fuel Injection Hose - Bulk

Barricade® Fuel Injection Hose - Bulk

Read More

Low-permeation, premium hose for use on all fuel systems, including fuel injection (MPI). Approved for use with gasoline, diesel, bio-diesel including soybean methyl ester (SME), rapeseed methyl ester (RME), palm methyl ester (PME) per ASTM D6751, E-85, methanol, ethanol, ethanol extended gasoline, gasohol fuels and 100% alcohol. Patented five-layer Greenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

  • Aramid reinforcement spiral braid for superior burst strength.
  • Exceeds SAE J30R14T2 (except for kink resistance) as well as low-permeation requirements for CARB.
  • Oil, heat, ozone and abrasion-resistant cover.
  • Recommended for any fuel injection applications for superior service life.
  • Thermoplastic barrier layer.
Hide all 3 Products View all 3 Products
Fuel Fill Hose (3 Ft. Lengths)

Fuel Fill Hose (3 Ft. Lengths)

Read More

Designed for transferring fuel from vehicle’s filler neck to fuel tank. Works on passenger cars and light trucks, as well as on auxiliary fuel tanks on recreational vehicles. For use with most types of fuels - especially resistant to gasoline and diesel.

  • Cuts easily with knife and wire cutters.
  • Features a high quality nitrile tube.
  • Meets requirements of SAE 30R5.
  • Suitable for use with gasoline, gasohol blends of ethanol, methanol, ethers, diesel and biodiesel to B20 (up to maximum concentrations allowed by the EPA).
Hide all 11 Products View all 11 Products
Gasoline Filler Neck Hose

Gasoline Filler Neck Hose

Read More

Designed specifically for auxiliary gas tanks on recreational vehicles. Excellent replacement for passenger cars and trucks where a straight hose with a minimal bend is required.

  • Meets SAE 30R6 specifications.
  • Non-wire reinforced.
  • Smooth oil-resistant cover, tough textile cord reinforcement and petroleum-resistant nitrile tube.
  • Suitable for use with gasoline, gasohol blends of ethanol, methanol, ethers, diesel and biodiesel to B20 (up to maximum concentrations allowed by the EPA).
Hide all 4 Products View all 4 Products
Fuel Fill Hose - Angled

Fuel Fill Hose - Angled

Read More

Designed specifically for auxiliary gas tanks on recreational vehicles. Excellent replacement for passenger cars and trucks where a straight hose with a minimal bend is required.

  • Meets SAE 30R6 specifications.
  • Non-wire reinforced.
  • Smooth oil-resistant cover, tough textile cord reinforcement and petroleum-resistant nitrile tube.
  • Suitable for use with gasoline, gasohol blends of ethanol, methanol, ethers, diesel and biodiesel to B20 (up to maximum concentrations allowed by the EPA).
Hide all 11 Products View all 11 Products
14 Items