Gates Green Stripe FleetRunner drive belts can take the heat.

When under load, the newer exhaust gas recirculation (EGR) engines are raising combustion temperatures and underhood temperatures.

Although vehicle manufacturers are upgrading both cooling system capacities and air handling on new models, fleets don’t know what life cycles they can expect from seals, gaskets, bearings, hoses and even exterior paint surfaces.

When it comes to the drive system belts, however, you can expect that Gates Green Stripe FleetRunner Micro-V belt and FleetRunner V-belt will give you nearly twice the service life of an ordinary belt.

FleetRunner belt brochure

Parts Store Locator  Product Application Engineers

Here’s why:

• A patented blend of elastomers allows the new Gates FleetRunner belts to retain their flexibility on drives where extended high operating temperatures cause other belts to harden, crack and ultimately fail.                                                       
• Testing shows the FleetRunner Micro-V belt will go at least 100,000 miles.                                                       
• In actual field testing by a major fleet carrier, Gates FleetRunner V-belt is still going strong after 250,000 miles.                      
• Until you try a FleetRunner belt on your specific application, there’s no telling how far your trucks will go between belt changes.                      
• Extend your belt change intervals, prevent downtime and cut maintenance expenses with Gates FleetRunner belts and Green Stripe DriveAlign® tensioners.

FleetRunner Micro-V Belt	FleetRunner V Belt

“Fleet executive says Gates has ‘the perfect belt’.“

Gates Fleet and Heavy Duty TECHTIPS